Porsche Piwis Tester II Piwis 2 V18.150 Porsche Diagnostic Tool

Highlights of Piwis Tester II For Porshe:
1.Software Version: V18.150 support 2018 last Porsche cars
2.Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
3.Update Method: By CD or HDD (One Year for Free, It can not be updated online.) Software contains operating system win XP only. you just need to insert into your computer and use it.
4.Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
5.Bluetooth,GPS and Navigation Function are available. But you need to pay for the authorization of them.
6.Support Key Programming function,cost 150USD per time ( you need consult our customer sevice first with the type and year of your car)

Notice :
1.Original Samtec HSX interface , Automatic firmware update , not  the J2534 or some bad clone can’t update or locked . (choose a best one will save your money and save your time!!!  got a poor quality one  after 2-3 month broken , then should send it back to repair . it  will lost shipping cost, lost device for diagnosis, lost business!)
Now some guys make clone from us but notice the BAD chips(the chips awlays Smudge or not clear) they use. and the poor Heat dissipation material ，it will very very hot after 5-10minutes , and then broken.

Porsche Piwis Tester II Functions:
1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II works with the old and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Piwis Tester II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Piwis Tester II Vehicle Coverage:
1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera
6. Support 2018year Porsche car models

NEXIQ-2 USB Link + Software Diesel Truck Interface and Software with All Installers
Top 8 Reasons to Get NEXIQ-2 USB Link :
1. Support system: XP and windows 7 (Volvo Hino Perkins Cat Nissan software must be used on xp system, other software can be used on win 7 32bit)
2. It Works As Great As Nexiq.
3. Compatible with applications that diagnose engines, transmissions, ABS, instrument panels and more.
4. Reduce reprogramming times with direct USB connection.
5. Mixed fleet capabilities with broad protocol support.
6. Quick access to vehicle data for maintenance or management reports.
7. Quickly attaches to vehicle’s diagnostic connector.
8. Easy portability increases flexibility, May be used with desktop PC or laptop.

Notice:
1. It Can Not Be Updated, Otherwise, The Multiplexer Will Be Damaged.
2. For Volvo, Hino, Cat and Nissan software, please install them on Windows XP only, other vehicle software can be installed on Win 7.
3. When you change time of your laptop, Cummins Inline software will get locked, please download the attached fileow-to-unlock-cummins-inline” to solve it.
4.Before install the Nexiq software CD,pls reinstall your computer system first,otherwise the multiplexer will be damaged

NEXIQ-2 USB Link Packed Software and Application：
– Allison (Included!)
– Bendix 6.3.8.0 (Included!)
– Detroit Diesel DDDL 7.05 ((Included!)
– Detroit Diesel DDCT (Included!)
– Detroit Diesel Calibration Tool (Included!)
– Eaton Service Ranger 3.2 (Included!)
– International DLB (Included!)
– International ICAP, IPTS, NETS, IPC (Included!)
– International Master Diagnostic (Incluided!)
– Meritor and Wabco Diagnostics (Included!)
– Cummins Insite 7.5 (Included!)
– Hino 2.0.2. (Included!)
– Caterpillar 2.0.1.0 (Included!)
– Perkins EST 2010B (Included!)
– V Macks 2.6.12 (Included!)
– V Macks Dealer Pro (Included!)
– Volvo VCADS 2.35.10 (Included!)
– Toyota Techstream for car (Included!)

NEXIQ 2 USB Link API Support：
RP1210A, RP1210B
J2534-2
USB vehicle-to-PC connectivity, XTruck USB linke supports Windows xp and  windows 7 32-bit and 64-bit and windows CE compliant
Not all applications are included. If compatibility confirmation is required, more information is needed, or there are questions about an unlisted application, please contact us, a specialist will help you make the right choice.

NEXIQ 2 Protocol Coverage：
CAN – J1939/CAN125/CAN250/CAN500/CAN1000
2nd CAN – J1939/CAN125/CAN250/CAN500/CAN1000
J1587/J1708 J1850 J2534
ISO 15765 (Diagnostic CAN)
ISO 14230 (KWP2000 over ISO9141) ALDL ATEC 160 (160 baud)

NEXIQ 2 Support Heavy-Duty, Light-and Medium-Duty Trucks, CONSTRUCTION EQUIPMENT like (Wheel loader, Articulated Hauler and Excavator), Genset.
FREE Heavy-Duty Truck Diagnostic Applications：
1.VOLVO TRUCK: FM10, NH565, FH12, FM12, VHD, FH16, FM7, VN, WC, WG, WI, FH565, NH12, FL6, FL7, FL10, FL12, NH525, WX, COMP04, FE, VHD, FH, FM, VM, FM9, F10, F12 , F16, NL10, NL12,VOLVO BUSES: B10B, B10M, B10L, B10R, M10R, B12, B58, B6, B7R, OLYMPIAN, SUPEROLY

2.VOLVO BUS: B12B,B12M,B12R,B6R,B7L,B7R,B9L,B9R,B9S,B9TL,PREVH,PREVX,

3.MACK TRUCKS: V-MAC I, V-MAC II, V-MAC III, V-MAC IV, Service Diagnostic

4.VOLVO CONSTRUCTION EQUIPMENT (CE):
Wheel loader: L110E, L110F, L120E, L120F, L150E, L150F, L180E, L180F, L220E, L220F, L330E, L350F, L60E, L60F, L70E, L70F, L90E, L90F
Articulated Hauler: A25D, A25E, A30D, A30E, A35D, A35E, A40D, A40E, T450D,
Excavator: EC135B, EC140B, EC140C, EC160B, EC160C, EC180B, EC180C, EC210B, EC210C, EC235C, EC240B, EC240C, EC290B, EC290C, EC330B, EC330C, EC360B,EC360C, EC460B, EC460C, EC700C, EC700B, EC700C, ECR145C, ECR235C, ECR305C, EW140B, EW140C, EW145B, EW145C, EW160B, EW160C, EW180B, EW180C, EW200B,EW210C, FC2121C, FC2421C, FC2924C, FC3329C, PL4611
Grader: G710B, G720B, G726B, G730B, G740B, G746B, G780B, G930, G940, G946, G960 , G970, G976, G990

5.Navistar: ALL Diamond Logic Builder (DLB) ServiceMaxx

6.International: ALL Intune, MD32,

7.Freightliner: ALLServiceLink:cascadia,century,columbia,Coronado,classic,FLDSD,4900FA, 4900SA,4900EX.

8.HINO:ENGINE:
300SERIES, 500 SERIES, CR03_J08E, CR03_J05D, COMMONRAIL(J05E), J05D_US, J08E_US,P11C,VCS, Hibrid, Inverter, Brake(ABS), AT_45043LE

9.ISUZU_GMC:
1996-1999 NPR Diesel and F Series Include NPR/W 3500, NPR HD/W 4500, This is for 6.0L V-8 Gasoline Engines only, 7.8L 6HK1 Engine
Isuzu: NPR, NPR HD, NQR, NRR, FTR, FVR, FXR with 6HK1 LG4 Engine, NPR, NPR HD,NQR, NRR with 5.2L (4HK1) or 3.0L (4JJ1) Diesel engine. 6.0L V-8 Gasoline Engine
GM: W3500, W4500, W5500, WT5500, W5500 HD,with 5.2L Diesel Engine Only,T6500,T7500, T8500

10.SCANIA VEHICLE, KOMATSU excavator, and MAN vehicle will be updated.

Recently , many customers consulted with us about Auto Repair Software , we’d like to recommend our ALLDATA 10.53 and Mitchell OnDemand5 software which is the best car repair information software for car repair shop offer the solutions . Please check the details for these software as following

1.Alldata 10.53

Alldata 10.53 auto repair software the leading computer based diagnostic , repair and estimating information system , can help you boost shop performance and build customer’s loyalty as your efficiently repair more makes and reduce comebacks.

Operating system : all the software runs on windows XP/win7/win8, but some software only work on 32 bit system , cant run on 64bit system , please pay attention this .

Please check some screen shot of Alldata 10.53 as bellow :

ALLDATA 10.53 automotive repair software have fast access to the industry’s best information for vehicles from 1982 to present including TSBs, maintenance schedules, manufacturer recall information, OE solutions, and factory images and diagrams.

2.2015 Mitchell OnDemand5

2015 Mitchell OnDemand5 is the most comprehensive information for 1982 to present vehicles which including Diagnostic flow charts, Parts and labor information,Manufacturer TSBs and Recalls,Integrated estimating software,Maintenance schedules .

Mitchell OnDemand5 Car Repair and Estimator workshop service and repair manual , diagnostics , connection diagram , spare parts catalog , labor times , maintenance , diagnostic trouble codes DTC,Technical service bulletins , diagnosis and repair , all cars and light trucks 1983-2015.

Whether you measure productivity by the number of vehicles repaired in one day, the variety of vehicles you’re able to work on, or the time spent on diagnosis and repair, using the right information and shop management tools is vital to the success of your business.

If you want to know more information , please check on our website : www.autonumen.com

Thank you

The JPRO heavy duty scanner diagnostics software is user friendly, it displays/erases SAE (generic) and OEM Engine, ABS, Transmission & Chassis Codes. The screen controls and menus are the same no matter which factory software is loaded on your computer

JPRO heavy duty trucks Diagnostics support Mack, Volvo, Cummins, Detroit Diesel, International & PACCAR. ford, GM, Isuzu & Sprinter

Is JPRO Diagnostics capable of parameter adjustments? No, JPRO Diagnostics is a diagnostic tool only.

Can JPRO heavy duty trucks Diagnostics clear Fault Codes?   Yes, JPRO heavy duty trucks Diagnostics has the ability to clear both active and inactive fault codes. JPRO  Diagnostics can also clear a single selected fault code.

Does JPRO Professional Diagnostic Tool work on a PC running Microsoft Windows Vista?  JPRO Professional Diagnostic Tool support Windows 7 Ultimate 32bit&64bit，Windows 7 Professional 32bit&64bit

Does JPRO Diagnostics support OBD II ？ Yes, JPRO Diagnostics supports OBD II using the Noregon JPRO OBD II Adapter (#12114).

MB SD Connect C4 C5 Software list:

1.DAS 2020.06: the automatically Diagnosis Assistance System
2.Xentry 2020.06: New software released by Bennz Company after 04/2009 by diagnosis new cars.
3.WIS net 2020.04:Workshop Information System

Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.

4.EPC.net 2018.11:Electronic Parts Catalog
5.ST Finder:Part Location Finder options: 2008 and 2016
6.STARUTILITIES :the movement management system and self-test
7.SD MEDIA 2014
8.PL73

9.Engineer Software：DTS monaco V8.14.016 And Vediamo V5.01.01 Support Offline Programming

10.HHT Software for old cars

11.Engineer version Vediamo updated to V5.01.01 ，Engineer version DTS updated to V8.14.016，Upgrade to the latest version of 2019 data

1) Fix the error that Mercedes-Benz DAS cannot directly call WIS

2) Join the DAS sedan smart offline programming

3) Join the 204 DAS stand-alone version, which can be mutated (German), which is more powerful than Vediamo

4) Join DAS special function password-free access PKW and SMART

5) Repair SMART 450, 451, 452, 454 No longer need TAN Caculator, all offline

6) Increase offline EOL and VMAX all LKW, modify truck maximum speed limit

7) Lift the truck NOx TORGUE restriction, do not need FDOK XT calculation code, directly enter, directly cancel the legal speed limit, you can modify without special function

8) Clear the truck SCR/ADBLUE fault code (MR), do not need FDOK XN calculation code, enter directly

9）Add DAS 212，207 prototyp model

10）Add Xentry special features and the VeDoc calculator($53 for activation)

XENTRY Advanced KeyGen Activate Xentry Software Procedures:

After you finish Xentry diagnostic software HDD(SSD) installation,run “Config Assist”


Finished!

Automotive repair shops that use the ALLDATA system have a clear differentiation from other repair facilities. ALLDATA-equipped shops can provide their customers with the most accurate repair estimates and proof of diagnostic and repair procedures. ALLDATA also includes factory-correct maintenance schedules that itemize additionally needed services. Moreover, ALLDATA helps shops build consumer confidence and loyalty.
Professional repair shops need current, factory-correct information to meet the complex repair demands of today’s automotive industry. ALLDATA shops have fast access to the industry’s best information for vehicles from 1982 to present including TSBs, maintenance schedules, manufacturer recall information, OE solutions, and factory images and diagrams.
ALLDATA DVD, the leading computer-based diagnostic, repair and estimating information system, can help you boost shop performance and build customer loyalty as you efficiently repair more makes and reduce comebacks.

Alldata 10.53 install video

Installation guide about JCB Service Master4 V1.45.3

JCB Diagnostic tool:https://www.autonumen.com/goods-4429-JCB-Electronic-Service-Tool-Diagnostic-Interface.html
Service Master – used for fast and effective fault finding, check maintenance standards, see if the machine has been abused, view and change machine set up data, flash ECUs with the correct data files. You can reset EMS hours, edit speed limiters and use other functions what require special unlock.

I just received my new tester and I figured I would share my thoughts since I have used both the Piwis 2 and the Porsche Piwis 3 now. I should be more precise as I did not purchase an actual PIWIS III.

the actual factory tool and currently sells for $5,900 which was way too rich for my blood. It is in the factory carrying case with all the cables and WLAN cap for the VCI that plugs into the usb mini port and allows for wireless connection to the car, along with the multimeter and oscilloscope cable.

What I bought, which sells for around $1,500 and what is for sale in most places, is a Lenovo laptop with Windows 10 installed and the Porsche PIWIS III software installed. I both cases the VCI and software have been modified to disable factory authentication and naturally there is no automatic updates. If you did have a PPN account, this tool would update normally.

It is a nice laptop with a touch screen.
Brand: Lenovo
Model: Lenovo Yoga12
Processor: i7 CPU, 8G RAM
SSD：256GB
Screen: Touch Screen

The Porsche software starts automatically, but the Microsoft button functions and you can do other things at the same time such as TeamViewer or open an internet page. The VCI ( the part that connects to the diagnostic port) is smaller and the cable connecting is shorter, but it is a standard USB to miniUSB cable so you can purchase an longer one anywhere.

The Porsche Piwis 3 Tester III can be changed from after sales mode to developer mode which allows for a lot of special features ( looking at you who want to disable start stop permanently). The software installed on a SSD, is work faster and easier to use than the previous version. For example on the diagnostic program, the tester auto detects the car model. Just plug it in, turn the key on and it does its thing. For me, I’m not sure if it is a function of the unit I have or not but the guided fault finding works well. Click on any fault and press the fault finding button and the unit tries to provide you a diagnostic plan. The plan is better and the English description is better. I haven’t tried the wiring diagram software but I imagine it works as well as the previous version. There is a new ODBC program on the unit that reads standard ODBC codes, I am wondering if this unit can be used for other cars for simple code reading. I will try it on a buddy’s car next week and let you know. There is a oscilloscope function and a multimeter function but the laptop clones don’t come with these cables. If you check out the link I added you can see a factory tool and what that kit contains as compared to a laptop clone with VCI. All in all it is a better tool but really can’t do more than the piwis tester 2 can do, only faster and on cars from model year 2018 to current which the Porsche diagnostic tool Piwis 2 can’t do.

Most offer one year of updates and then charge for subsequent years. It should be known that the updates are really for adding new model years, not software changes.
Piwis 3 Update: Send Laptop with SSD back to upgrade, 1 year for free, after one year, 100usd/time. You can Send SSD back or buy a new SSD.

JPRO Professional Truck Diagnostic Tool Heavy-Duty Medium-Duty Truck Scanner

What doe

JPRO Professional truck scanner is the most comprehensive and powerful all makes, all models diagnostic tool available in the industry today. In one, easy annual subscription, JPRO provides a complete & unparalleled diagnostic service & repair solution with bi-directional functionality.

1. What does JPRO Professional Diagnostic Tool do?

JPRO empowers diesel technicians to diagnose and repair all makes, models, and components.
Heavy Duty Truck Scanner JPRO reduces a technician’s dependency on OEM software by offering industry-leading bi-directional controls, including DPF regens, cylinder cutouts, parameter changes, and much more. For detailed information and full coverage details, visit the JPRO Professional page.

2. What trucks will JPRO work on?

For commercial vehicles, JPRO is an all makes, models, and components solution. For detailed information, check out our coverage chart.

3. If I buy JPRO, do I need anything else?

JPRO Software requires a compatible Windows based PC, Laptop or Tablet, RP1210C compliant adapter and the appropriate cable that connects the computer to the vehicle’s OBD-II, 9-Pin or 6-Pin port.

If you do not already own the items listed above we recommend purchasing JPRO as part of an adapter or diagnostic service kit.

4. Can JPRO Commercial Vehicle Diagnostics perform bi-directional vehicle tests such as Cylinder Cut Out tests?

Yes. JPRO comes loaded with industry-leading bi-directional tests for the makes and models you commonly repair. For a full list of included tests, visit our coverage chart.

5. Can JPRO Commercial Vehicle Diagnostics adjust user-configurable parameters such as road speeds or idle shutdown settings?

Yes. On certain vehicles, users can adjust max cruise speed, max road speed, idle shutdown times, and enable/disable cruise control. Visit our coverage chart to see which vehicles currently allow parameter changes.

6.our coverage chart to see which vehicles currently allow parameter changes.

Yes. On certain vehicles, users can adjust max cruise speed, max road speed, idle shutdown times, and enable/disable cruise control.

7. What OEM applications come with JPRO Commercial Vehicle Diagnostics?

Although installed OEM applications can be launched directly from JPRO, OEM applications are not included with your purchase. JPRO is intended to alleviate the need to use many different OEM applications by providing coverage for all makes, models, and components.

8. Can JPRO Commercial Vehicle Diagnostics clear fault codes?

Yes. Users have the ability to clear inactive fault codes.

9. Can JPRO Commercial Vehicle Diagnostics perform ECU programming?

No, JPRO is a standalone solution that does not require any third party applications. If needed, installed OEM applications can be launched directly from JPRO.

Due to security and safety concerns, JPRO does not allow users to reprogram ECUs.

10. Do I need OEM software in order for JPRO Commercial Vehicle Diagnostics to work?

No, JPRO is a standalone solution that does not require any third party applications. If needed, installed OEM applications can be launched directly from JPRO.

11. If I have OEM software, why do I need JPRO Commercial Vehicle Diagnostics?

Diagnosing on a component-by-component basis is time consuming in an industry where time is extremely valuable. JPRO covers all components on the vehicle to provide users with a holistic view of the vehicle to improve total vehicle health. Heavy Duty Diagnostic JPRO automatically detects all components on the vehicle, down to the serial number, so you don’t even have to choose which application is needed to diagnose the vehicle you are diagnosing and repairing. If you do need additional information from your OEM applications, JPRO will launch the application and/or its associated troubleshooting manuals directly.

12. How does JPRO Commercial Vehicle Diagnostics diagnose aftertreatment issues?

On one simple screen, JPRO allows you to view the overall health of the aftertreatment system. Users easily view information such as soot level, DPF lamp status, and engine derate as it relates to aftertreatment and current regen status. JPRO also provides regen zone information and explains to users why that vehicle is in a particular zone. From many screens outside of the aftertreatment section of JPRO, users will be alerted if a DPF regen is needed and/or inhibited. DPF regens can be initiated from multiple screens within JPRO.
Does JPRO Commercial Vehicle Diagnostics support OBDII?

13. Does JPRO Commercial Vehicle Diagnostics support OBDII?

Yes. View our coverage chart for additional details.

14.  Can I look at the data in log files?

To protect the vehicle owner’s vehicle data, log files are stored in a format that cannot be read by a simple text editor. However, log files can be played back with JPRO’s playback function to view all vehicle data as it was during the original connection.

15. What is the default location for saved log files?

JPRO stores log files by default in the C:\JPRO Logs\ folder on your device.

Everything you need to diagnose and repair heavy & medium-duty vehicles.