So far, in 2015 and 2016 Land Rover, safer method to make a new key is to remove the RFA smart computer to refresh the data, and then use the original JLR device to program the key.

Here’s the example using SDD VCI:

Step 1.  Read RFA data

initialize the RFA smart computer

Left rear in the car, open the instrument, see the fuse box, remove the fuse box to see the RAF smart computer.

Open the RFA smart computer, using VVDI Prog programmer, wire read data. Read out the original car data EEprom, P-FLASH, D-FLASH, backup is good.

Then brush into a new set of data, EEprom, P-FLASH, D-FLAS data, please contact us you want this set of data .

Brush the data, everything back to the original loading.

Step 2. Key programming/learning

Connect JLR VCI interface (JLR VCI, JLR SDD2, JLR DoIP VCI, VXDIAG JLR) with the vehicle via OBD.

Go to the keyless vehicle module, the device will prompt to download the file, initialize the module, according to the device prompts.

Select the number of keys, and then press the smart card button, the vehicle horn will ring twice, the representative has successfully learned

Note:  The above method can only add a key.

Problem:

I am doing a Land rover 2006 LR3 HSE V8 with 4.4 engine with vxdiag vcx nano jlr sdd scanner. I’ve downloaded SDD Full160 and got http Error:500 splash_screen_boot.index. SDD keeps loading won’t continue.

I also tried to update JLR DoIP driver in vx manager, it failed to and says the device license for this application is invalid or expired. How can i fix this.

Autonumen.com solution:

1. Make sure you have installed the patch for JLR SDD. Run SDD from the patch.  Don’t start SDD from vx manager JLR SDD driver !!!

Check: JLR SDD V160 Download & Installation

2. You don’t need to update DoIP driver for vcx nano.

DoIP driver (or license) is used for Pathfinder for newer Jaguar Land rover 2017 onwards.

Besides, DoIP license cannot be added to the vcx nano jlr device. The license invalid error occurs if you are trying to update the DoIP driver.
You will need VXDIAG VCX SE JLR or JLR DoIP VCI interface to access DoIP models.