Ford IDS 118.01 is verified working fine with VCM2 clone and vxdiag vcx nano by running with win7/8/10 32/64bit.
Download Free
Ford IDS V118.01
https://mega.nz/folder/fcoVnYZT#jpEjr4HHXU5Ifg8Hm0xERg
Mazda V118.01
https://mega.nz/folder/bMg1ECzT#BjEMSq1TUvdgn2aT2CKTEg
IDS patch for VCX Nano
https://mega.nz/#F!OV4RRC6B!seCWP6UCzOPWEDYlQxZ1iQ

OS: win7/8/10 32/64bit

Language:  English, German, French, Italian, Dutch, Spanish, Swedish, Finnish, Danish, Norwegian, Portuguese etc
Compatible with VXDIAG VCX NANO for Ford Mazda (USB & Wifi version ) vxdiag vcx pro, vxdiag full, vcm2 clone (using vxdiag solution) etc.

How to install Ford /MAZDA IDS V118.01 For VXDIAG VCX NANO & VCM2  video: https://youtu.be/0UoRauT_N5E

Procedure

Open the folder “Ford Install”, then “IDS-118.01_Full”.

Choose IDS language.

Recommend you restart the computer.

Welcome to the InstallShield Wizard for IDS.

Agree the license agreement.

Please select the destination drive, then click on “Next”.

IDS is configuring your new software installation.

Updating the database.

Reboot the computer.

Open the folder “Ford Install”, then “VCI_Software_1.0.0.0.” to install until successfully.

Open “VCI Manager (Ford) 19.04.28″.

Open “F-M_Patch” then copy “IDSPatch” and paste it on the desktop.

You need to connect VCM2 (or vxdiag vcx nano) and car now.

Open “IDSPatch” on the desktop, choose “Dealer type: non-dealer” and Country “Botswana”, then “confirm”.

Welcome to IDS 118.01 menu.

Choose “Start New session” -> “All other”, then confirm.

Operation in process.

Vehicle specification.

Confirm.

Self test.

Powertrain -> Engine -> retrieve CMDTCs.

Set the ignition switch to ON.

Reading continuous DTCs.

Job is done.

Good luck!
https://www.autonumen.com/goods-5280-Ford-VCM-II-Ford-VCM2-Diagnostic-Tool-With-Laptop.html

Many individuals that get their GM Tech 2, very first thing is usually to do a self-test. It is just a method to exam if your GM Tech 2 is sweet or lousy. Should the Tech 2 test isn’t excellent, we could make contact with the customer companies immediately and change a new just one or get some specialized assistance.

GM trouble codes may be retrieved with or without a code scanner on pre-1993 GM vehicles, due to the type of OBD port connector of Vetronix GM Tech 2 .This port has been changed in the later model vehicles, and Tech 2 Scanner is necessary to retrieve the codes. Once the codes have been retrieved, the accompanying site will have a list of the codes and their meaning. To erase the codes and turn the check engine light out.

This is the CAN DI test for GM Tech 2. When your Tech 2 Scanner has problem, you can use the following ways to do the test, then you can know which part of your GM tech 2 has problem.

https://www.autonumen.com/goods-6947-GM-MDI-2-Diagnostic-Tool-Multiple-Diagnostic-Interface.html
Q: Can GM Tech 2 Scanner support key coding and electronic control unit programming for all OPEL and Isuzu?

A: GM tech2 can’t support key programming; as for electronic control unit programming, you need to additionally buy a GM TECH2 and a TIS2000, but TIS2000 only support GM and Opel, not support Isuzu.

Q: Can GM Tech2 send commands to the various modules and is it able to do diagnostics on a climate control programmer? To what year is the scanner effective? I own a 1997 Cadillac DeVille and a 2001 Chevrolet Venture.

A: Yes, you can use GM TECH2 to diagnose climate control programmer, when it has communication GM Tech 2 can send commands to the modules.

Q: GM TECH 2 contains Saturn software?

A: yes, Saturn software is included in the GM software English and support for on-board diagnostics on all GM systems 1992 thru 2013.

This is from autonumen.com website technical support

Here’s the detail guide on how to update software of Mercedes Benz DoIP Xentry Connect C5 MB Star diagnostic scanner.  DoIP C5 comes with both internal hard drive and external Dell HDD .

Note:

1.The upgrade procedure fits for DoIP Xentry Connect C5 but no SD Connect C5 (SD C4 in C5 case).

2.

If you have XDOS 2018.3 or  2017.9 not working well, you should update it to version 2018.7.

If you have XDOS 2018.5 works good, it’s not necessary to update to 2018.7.

3. If you feel complicated to update the firmware by yourself.  You can send both Doip C5 HDD and Dell HDD to us to run an upgrade.

Part 1: How to remove Xentry Connect C5 internal HDD

Here’s a video explaining in detail

Part 2: How to update Xentry Connect C5 software

Tools required:

Xentry_Kit_09_2017.iso（copy to the folder:  iodd 2541 _ISO）

U disk with a Windows machine (recommend Bigbaicai WinCE)

IODD 2541 External Encrypted Hard Drive or similar

Panasonic power adapter

Xentry Connect C5 multiplexer

C5 mux in standby mode

connect the Panasonic power adapter to C5

insert IODD 2541 into the USB port on C5

in a standby mode, press “X” and “√” at the same time, then it will pop up “Start Update?”

(if not, it will pop up “Start XENTRY Connect?”. then, when the prompt disappears, it will display “Start Update?”)

When you see “Start Update?”, press “√” and Connect C5 will go into the update mode and IODD 2541 will light up

Press button “5” on IODD 2541 as soon as possible. then, the cross “X” will turn a circle “O”

what’s displayed on C5:

It will take 50-55 minutes to finish the upgrade

The system restarts after installation completes

If your system fail to start, turn off C5 mux and restart again

When C5 starts, take out the hard disk on C5 and install it into the laptop (here: Dell 55220)

Before it, pls install the Windows machine on the U disk

Press F12 when you see the pop-up “F12 Boot Options”

Select USB Storage Device and press “Enter”

Pop up the interface, and select [03] WIN2003 PE Classical

Go to the PE system and create an user account

Note that Windows should be located in disk D:

After path selection, right click on “Create a new admin account” on the left

User name: C5, Password: abc12345678
(You can have any user name and password you want)

Click on Ok

Close the application

Turn off the laptop

Take out the disk off the laptop and install it into C5 multiplexer

Done!

Part 3: How to activate Xentry Connect C5 after upgrade

Here’s teamviewer file explaining the step-by-step activation procedure

https://mega.nz/#!Gp8lzLLK!-B3Ytw1j-YoC9tWM_atYxgvmer5mbOMNxfH4BYz4D0E

Files needed to activate C5:

Activation key

2018.7 key

Black list C5

Part 4: How to install EPC WIS software

Video 1

Video 2

Part 5: How to connect C5 SD connect  with Xentry Tab/Laptop

Here’s example on connecting C5 with Xentry tablet, can be also connected with Dell D630 or Lenovo laptop.

C5 is Standby status when not connect with car

C5 has 2 USB connectors and round power connector (power by Panasonic power adapter) on left side

Connect LAN cable and power cable with C5

Press Power button foe 3 sec to turn on Tab

Connect Xentry C5 OBD cable and LAN cable

No car connected. Because it is not connected to vehicle

Xentry Tab main menu

Open Xentry Control

Then come to this interface, wait for the communication

Xentry is connected with SD C5

Click on green icon

Launch Xentry software

Run MB Star diagnostic software and start diagnose Mercedes.

Customer problem: When I install ODIS V5.1.6 software through my VAS6154 diagnostic interface. An error is displayed in the offboard diag launcher process with the words \”Framework start failed with 13\”. There is no file to choose from in the local directory.

Solution offered by Autonumen engineer:

You need to install a virtual optical drive, map the more 30 unzipped files into a CD.

And in the URL option, click “Select local directory” to select the corresponding drive.

VW AUDI ODIS diagnostic software 6.2 with dealer license, use VAS6154A Connect Car.

Are you looking for a scanning tool to replace the old one to run quickly and easy to use? GM MDI 2 will be a good choice for you. Here share the details of MDI2 including features, functions and supported protocols etc.

OVERVIEW

MDI is an interface between the vehicle DLC and a PC (by wired USB, wired Ethernet, wireless Ethernet) and TIS2 web.

GM MDI 2 Features:

Works as the high-quality Vauxhall / Opel dealer diagnostic interface
Can be used with Global TIS, GDS 2, Tech2Win software on a new laptop
Provides full dealer level diagnostics and programming
Supports all Vauxhall /Opel 16 pin vehicles from 1996 to 2017
Performs quickly and used easily

GM MDI 2 Functions:

Automatic vehicle recognition
DTC reading and removal
Complete list of live data streaming for all main ECU
Recordable / playback of live data

New software flash for existing ECU to fix drivability issues
Programming and installation of new ECU (PCM, ABS, Instrument cluster, air bag, fuel pumps etc.,)
Programming new keys
Setting / removing speed limiters
J2534 pass thru offering ECU re-flash and diagnostics for other vehicle manufacturers, when subscribed to their specified software
More dealer specific functions

What protocols does the GM MDI 2 Scanner support?

For immediate use- At present, vehicles have two buses on the 16 pin connector
(high speed and low speed GMLAN). The GM MDI communicates using all of the existing GM protocols, the same as the GM Tech2:
– UART
– Class 2
– KWP2000
– GMLAN (CAN)
Beginning with the 2008 model year vehicles, Pass-Thru will be the only programming method available. (Remote will continue to be available for previous vehicle

Where to buy GM MDI 2?
If you would like to buy Multiple Diagnostic Interface 2, click here to get more info: https://www.autonumen.com/goods-6947-GM-MDI-2-Diagnostic-Tool-Multiple-Diagnostic-Interface.html

Nissan Consult III Plus scan tool will be needed to perform the process of reflashing/reprogramming Nissan ECUs. This process works for any computer on any Nissan vehicle and is the same process if you use the factory tool (Nissan Consult) or a J2534 tool.

A Consult3+ clone can be used to flash ECU, but only work on Nissan pre-2016.  For newer Nissans, the reflash file needs to be purchased for the Nissan website and is an extra purchase to the Nissan subscription purchase you also need to make.

On some vehicles you will need to email Nissan to have the file sent to you, these vehicle do not require you to purchase the file but do require the subscription purchase.

Nissan Consult III+  ECU Reflash/Reprogramming Update Procedure

Model example: Nissan Maxima 2016

• Reprogram ECU
• Throttle valve closed position learning
• Idle Air Volume learning
• Accelerator Pedal Closed position learning
• Confirmation Start up Engine
• Erase DTCs
• Completed

Detail:

Select vehicle information, Go to Measurement Mode

Read Precaution and confirm

Read VIN and confirm
Cumminicating  with vehicle

Select Engine system->Reprogramming

Save operation log

Read and confirm operation procedure

Check vehicle detail information and confirm

Confirm vehicle condition. Remove the terminal caps of the battery and connect battery charger to battery.  Adjust the battery charger output so that the vehicle voltage is between 12.0V and 13.5V.

Confirm the RESULT is ok and confirm vehicle conditions listed on the interface

Transfer data among computer, Nissan Consult 3 plus and vehicle

Reprogramming is completed.

Perform throttle valve closed position learning

Fully release the accelerator pedal. Turn ignition ON and turn off. Then count download of 10 seconds starts.

Make sure throttle value moves during count down of 10 seconds by confirming the operating sound.

Turn Power switch/ignition SW to ON position.

Perform Idle Air Volume learning

Perform Accelerator Pedal Closed position learning
Turn ignition switch to OFF position and hold it for 10 seconds or more

Turn ignition switch to ON position and hold it for 2 seconds or more

Repeat the procedure once or twice

Turn ignition switch to OFF position

Confirmation Start up Engine
Confirm the engine keeps starts and idling normally.

Erase DTCs

The ECU reflash update procedure is completed.

How to Install ODIS 4.2.3 And Set up USB/WiFi For VAS 6154

VAS 6154 Driver, Install, USB/WiFi setup

Look here: all details for vas 6154 head (esp. china clone)

vas 6154 driver:

vas 6154 driver download

https://mega.nz/#!8LAikSQK!g05ClEGjMjFG7IwSU3PDBginUHvbckoyJCUlrLUY3sQ

vas 6154 installation:

vas 6154 windows 7: confirmed to work

vas 6154 windows 10: no luck

I will prefer you to use windows 7 for all the diagnostic devices, this is because of the security of the windows 10. The best way to get a good working diagnostic program is to have one and only laptop for this. A clean windows 7 is the best way.

Have a try on Win 7 32 bit and 64. both have the luck

32bit: x86 is soooo much better since there is no any lack of the functionality for any kind of driver of ur laptop , I test both x86 is better and u can install both yes ODIS-S and ODIS-E

64 bit: I installed on win7 64bit and it installed and I added the update file from the download, starts and works very well

vas 6154 usb setup:

There are two VAS 6154 ODIS china version, one with a wireless module and the other without it.

But both come with a USB module.

vas6154 wireless setup:

vas 6154 wifi setup: yes!

vas 6154 bluetooth setup: no!

Vas 6154 china clone CANNOT connected via Bluetooth, but WiFi available for wireless connection

Look here: How to set up vas 6154 wifi:

Step1: Input the fourth CD and open it and then install the vas 6154 driver

Step 2: Open the CD and then chose the vas 6154 driver to install

Step 3: After installed and click on the Desktop – symbol

Step 4: Click on the Device Configuration

Step5: Choose the connection way “WLAN”

Step 6: Choose the “save”

Step 7: Plug the vas 6154 to the car

Step 8: Open the WIFI and find the VAS-6154 wifi name and connect it.

Step 9: It shows Connected

Step 10: The state of connect successfully

Step 11: Open odis software. Now the latest version is 4.4.1

Step 12: VAS 6054 wifi connection setup successfully.

Done! Ready for use!

Error description: Installed Consult-III Plus V75 software on win7, got error ” CONSULT-III plus software is not supported by this computer. Check the computer and install CONSULT-III plus software on a suitable computer. Touch ‘OK * to finish the installation.” I also installed on Win 10 Pro, Win 7 Enterprise, Win Xp Sp2 etc, I got the same error message.

In German:

Consult-lll plus * InstallShield Wizard

CONSULT-III plus Software wird von diesem Computer nicht unterstützt. Computer prüfen und CONSULT-III plus Software auf einen geeigneten Computer installieren. Berühren Sie ‘OK*, um die Installation zu beenden.

Autonumen.com engineer replied:

You have to put the following file into the software before installing consult-iii plus v75

https://mega.nz/#!RVxWkSDb!XbsvWRI90YScFLdq3AZUGJHDhu5Iq_rvpJ9VE-rHfFM

Simple steps:

1.Open “tempNissan” -> “C3P_V75.15.00”

2.Copy “Setup.inx” on the desktop, paste it into “C3P_V75.15.00” to replace the original one.

Nissan consult-III plus v75.15 install video:

Nissan consult-III plus v75.15 tech support: www.Autonumen.com

Samtec Piwis Tester II is the latest professional tester for Porsche,with samtec piwis tester 2 hardware,powerful functions,full access.  Wifi piwis tester ii work with the full system porsche car ,Piwis II Wireless tester comes with best piwis ii VCI , support online function, It is equiped with the panasonic CF30 laptop and V18.100 software for the test.

Samtec Piwis Tester 2 with Panasonic CF30 Installed V18.100 Software Full set Ready to Use for Porsche

Samtec PIWIS 2 Tester Description:

1. Software Version: V18.100, software will never expire!!
2. Laptop: CF-30 (Second Hand)—Software is inside the Hard Drive. No need Installation
3.Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Update Method: By HDD or By Email, one year for free, It can not be updated online. (Software contains operating system win XP only. you just need to insert into your computer and use it.)
5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
6. Bluetooth, GPS and Navigation Function are available. But you need to pay for the authorization of them.
7. Support Key Programming function ( you need consult our customer service first with the type and year of your car)

How to Setup Porsche Piwis tester II V18.15

1．The pacakge comes with a HDD.

2．Porche tester ii for Porsche OEM Wireless Solution Released! The wifi solution is 100% OEM as dealership ones, you can choose both USB (LAN) connection and Wireless (WLAN) function, also the wifi signal is really strong.

3．You will get One year free maintenance and free updating ,but  Long-term technical support

4．Only use IP addresses approved for local operation (e.g. 192.168.x.x) in the local wLAN/LAN

How to use WIFI Samtec PIWIS II Setting Guide

Step 1 : need connect the USB cable to laptop, then setting in [VCI Config] by inputing the SSID and Password of router.

Step 2 : After configuration ,pls remove USB connection from your PC.

Step 3 : Install Samtec Piwis Tester II V18.10 Software and follow the system guide to enter Piwis Tester II V18.10 Software home menu like pix show

step 4 :  Then you can choose operation to programmer or diagnostic for your Porsche

Step 5 : After finish diagnostic, please quit the connection, and quit to the homepage of the automotive diagnostic equipment, then shut off the laptop in correct way(DO NOT Press Power Button, otherwise the system will be damaged)

TIPS FOR CONFIGURING THE PIWIS II WIFI ROUTER
Only use IP addresses approved for local operation (e.g. 192.168.x.x) in the local wLAN/LAN
Example:
Network: 192.168.1.0, subnet mask 255.255.255.0
• Addresses that can be used: 192.168.1.1 up to 192.168.1.254
• Router address (gateway): 192.168.1.254
• Client addresses (e.g. VCI, laptop): 192.168.1.1 up to 192.168.1.100 (max. 100 participants)

For more details information, welcome to Add my Whatsapp (+86-18381124870) or Skype (Skyking) if you have, Your Private Secretary in Car Repair Area! 16 Hours Online at your Service!

Autonumen.com Focus on OBD Tool Since 2008

What’s app: +86-18381124870

Skype:Autonumen-Rose

This article is compiled by  www.Autonumen.com, if you have any advice on it, pls feel

free to contact autonumen.